Quadruple inlet for flexipipe
Quadruple inlet for flexipipe
Quadruple inlet for AU80 -range installation boxes, with locking device for flexible conduit. Can be used with two Ø16 mm and with additional two Ø16/20mm flexipipe (20mm inlets are equipped with reducer to Ø16 mm and with plugs). To be installed to the side of the installation box where there are two Ø20 mm knock-outs. IP rating IP3X. Made of halogen free material (IEC/61249-2-21).
-
Installation Materials
- Flush mounting boxes
- Junction boxes for flush mounting
-
Accessories for mounting boxes
- Nordic box accessories
- Accessories for ABB BeTon flush boxes (AUB67, AUB67H)
- Extension ring 2 mm
- Extension ring 4 mm
- Extension ring, 13 mm
- Extension ring 15 mm
- Extension ring, 28 mm
- Extension ring, 60 mm
- Extension ring for AU17.2
- Extension ring for junction boxes, 13 mm
- Extension ring for junction boxes, 45 mm
- Interconnectors
- Box support
- Inlets
- Angle inlet
- Strain relief inlet
- Back inlets
- Strain relief inlet
- Reducer
- Interconnector, for mounting box AUS15.2
- Plug to inlets
- Inlets for board wall mounting boxes, 20 mm
- Support for junction box
- Installation plug
- Board wall clamp
- Installation adaptor
- Screws for mounting boxes
- Protective cover
- Protective cover
- Protective cover
- Mounting fixtures to wooden or steel frames, for blue mounting boxes
- Mounting box support
- Box support for concrete elements
- Piping materials
- Covers for mounting boxes
- Surface-mounted junction boxes
- Accessories for surface mounting junction boxes
- Cable Protection and earthing materials
- Fire retardant boxes (EI30 and EI60)
- ABB system BeTon products for casting applications
- Wiring Accessories
- Signal
Näytä lisää
Inlet
Quadruple inlet for flexipipe, 2 x Ø16 mm + 2 x Ø16/20 mm
Tyyppi: AN8.4 GTIN: 6438199005140 Tuotekoodi: 2TKA00003692