Mounting box
Tyyppi: AU3.2 Tuotekoodi: 2TKA130029G1 GTIN: 6410011523643 Tuotekoodi: 2TKA130029G1 J M N K
The mounting box is designed for installation in all new buildings and in prefabricated building elements, and can be used with cast materials. It has a total of five knock-out inlets, two of which are on the same side. The bottom of the box provides access for two rear inlets. The boxes can be connected to each other with the PMR474 interconnector. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670: 2005 (850 °C).
Tekniset tiedot
Sähkösuureet
| Operating voltage: | 400 V |
Thermal conditions
| Operating temperature: | -25 … 90 °C |
Pakkaus
| Paketti: | 100 |
| Yksikkö: | kpl |
ETIM Data
| ETIM Version: | ETIM-9.0 |
| ETIM Class: | EC002601 |
| Mounting method: | Flush mounted (plaster) |
| Shape: | Round |
| Construction type: | Device connection box (round/square) |
| Model: | Single |
| Provided with revolving ring: | Ei |
| Connectable: | Kyllä |
| Equipped with: | None |
| Diameter: | 71 mm |
| Length: | 71 mm |
| Width: | 71 mm |
| Depth: | 71 mm |
| Inner depth: | 45 mm |
| For number of electric fittings: | 1 |
| Mounting switching equipment: | Screwing |
| With screws: | Kyllä |
| Housing feed-through by break-out opening: | Ei |
| Housing feed-through by seal membrane: | Ei |
| Housing feed-through by nozzle: | Ei |
| Housing feed-through by step membrane: | Ei |
| For tube diameter: | 20/25 mm |
| Pipe locking: | Kyllä |
| Pipe locking optional: | Ei |
| Inlet from the rear: | Kyllä |
| Material: | Plastic |
| Halogen free: | Kyllä |
| Surface protection: | Untreated |
| Colour: | White |
| Degree of protection (IP): | IP44 |
| Transparent cover: | Ei |
| Cover attachment: | Snapped on |
| Sealable: | Ei |
| With screening: | Ei |
| Air tight: | Ei |
| Clamp position fixed: | Ei |
| Luminaire hook mounting: | Ei |
| Special application: | None |