Hyppää pääsisältöön
  • ABB Global
Etusivu ABB Oy, Asennustuotteet
  1. Etusivu
  2. Node
  3. Busch-Rotary-Dimmer Electronic Controls White

Busch-Rotary-Dimmer Electronic Controls white

Electronic Controls

Busch-Rotary-Dimmer Electronic Controls white


Tyyppi: 6523 URJGL-214-104 Tuotekoodi: 2CKA006512A0355 GTIN: 4011395344088 Tuotekoodi: 2CKA006512A0355

LED dimmer With rotary control.
Two-way switch and soft-catch.
With N-terminal.
2- or 3-wire connection (neutral conductor not required).
Neutral conductor optionally connectable (recommended for the connection of low loads < 10 W/VA).
Without claws.
Very low installation depth: < 20 mm Without claws.
Optimised for dimming of retrofit LED lamps (LEDi).
For dimmable Retrofit-LEDs (LEDi).
For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers.
For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps.
Mix operaton of LEDi with conventional loads possible.
With manually adjustable operating mode: trailing / leading edge control.
With adjustable minimum/maximum brightness.
Low-noise level by MOSFET transistors.
With electronic short-circuit protection. With electronic overload protection.
With Jussi cover plate and 1gang frame.
Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz
Nominal power (L): 2 - 100 W/VA (leading-edge control)
Nominal power (R, C): 10 - 360 W/VA (trailing-edge control)
Nominal power (LEDi): 2 - 100 W/VA (leading-edge control)
Nominal power (LEDi): 2 - 200 W/VA (trailing-edge control)

Lataa

  • PDF-tuotekortti
  • Deeplink REACH
  • Instructions for use
  • RoHS-ilmoitus
  • Vaatimustenmukaisuusvakuutus CE

Tekniset tiedot

Luokitus

Suitable for degree of protection (IP): IP21

ETIM Data

ETIM Version: ETIM-9.0
ETIM Class: EC000025
Assembly arrangement: Basic element with central cover plate
Method of operation: Turn/push button
App control via Bluetooth: Ei
Dimming phase cut-on: Kyllä
Dimming phase cut-off: Kyllä
Serial dimmer: Ei
Type of load: Universal and LED Retrofit
Substation input: Ei
Light value memory: Kyllä
Applicable with button: Ei
Applicable with movement sensor: Ei
Applicable with presence indicator: Ei
Applicable with time switch/timer: Ei
Applicable with transmission button: Ei
Applicable with infrared button: Ei
Minimum brightness controllable: Kyllä
Mounting method: Flush mounted (plaster)
Type of fastening: Mounting with screw
Material: Plastic
Material quality: Thermoplastic
Halogen free: Ei
Surface protection: Untreated
Surface finishing: Glossy
Colour: White
RAL-number (similar): 9010
Transparent: Ei
Impact strength: IK00
Nominal voltage: 230 V
Max. switching power LED: 360 W
Connection type: Screwed terminal
Core cross section: 1...2.5 mm²
Device width: 85 mm
Device height: 85 mm
Device depth: 44 mm
Min. depth of built-in installation box: 20 mm
Compatible with Apple HomeKit: Ei
Compatible with Google Assistant: Ei
Compatible with Amazon Alexa: Ei
IFTTT support available: Ei

Hyödyllisiä linkkejä

Esitteet

Esitteet

Videot

Videot

Tuoteuutuudet

Tuoteuutuudet

Sertifikaatit

Sertifikaatit

Yhteystiedot

Yhteystiedot

© 2025 ABB
  • Palveluntarjoajan tiedot
  • Tietosuojailmoitus
  • Muuta evästeasetuksia
Alueen / kielen valinta
  • Global - English
  • Finland - Suomi
  • Sweden - Svenska
Oma tuotekori
Tyhjennä kori


Tyyppi:
Snro:
Tuotekoodi:
GTIN:
Määrä
PDF-tuotekortti

Korissa ei ole tuotteita. Lisää joitakin.